Stress concentration around a rectangular cuboid hole in a three-dimensional elastic body under tension loading
No Thumbnail Available
Links to Files
Author/Creator
Author/Creator ORCID
Date
2018-05-29
Type of Work
Department
Program
Citation of Original Publication
Yi Yang, Yufeng Cheng, Weidong Zhu, Stress concentration around a rectangular cuboid hole in a three-dimensional elastic body under tension loading, Archive of Applied Mechanics August 2018, Volume 88, Issue 8, pp 1229–1241, https://doi.org/10.1007/s00419-018-1369-7
Rights
This item is likely protected under Title 17 of the U.S. Copyright Law. Unless on a Creative Commons license, for uses protected by Copyright Law, contact the copyright holder or the author
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
Abstract
Stress concentration caused by holes can be investigated by numerical and analytical methods. Current analytical methods can only solve two-dimensional problems. This paper proposes an analytical study on a three-dimensional stress concentration problem that involves a rectangular cuboid hole in a three-dimensional elastic body under tension loading. Based on the finite element method and U-transformation method, the problem can be expressed as a set of uncoupled equations with cyclic periodicity. Displacements of the three-dimensional elastic body are derived in analytical form to study stress distribution in it. Numerical simulation is conducted using ABAQUS to verify the analytical solution. Stress concentration factors in cases of uniaxial, biaxial, and triaxial tensions and the effect of the side ratio of the hole on them are discussed.