Zaw, Myo MinZhu, LiangMa, Ronghui2024-11-142024-11-142024-10-09Zaw, Myo Min, Liang Zhu, and Ronghui Ma. “Numerical Study of Heat Transfer Enhancement Using Nano-Encapsulated Phase Change (NPC) Slurries in Wavy Microchannels.” Fluids 9, no. 10 (October 2024): 236. https://doi.org/10.3390/fluids9100236.https://doi.org/10.3390/fluids9100236http://hdl.handle.net/11603/36954Researchers have attempted to improve heat transfer in mini/microchannel heat sinks by dispersing nano-encapsulated phase change (NPC) materials in base coolants. While NPC slurries have demonstrated improved heat transfer performance, their applications are limited by decreasing enhancement at increased flow rates. To address this challenge, the present study numerically investigates the effects of wavy channels on the performance of NPC slurries. Simulation results reveal that a wavy channel induces Dean vortices that intensify the mixing of the working fluid and enlarge the melting fractions of the NPC material, thus offering a significantly higher heat transfer efficiency than a straight channel. Moreover, heat transfer enhancement by NPC slurries varies with the imposed heat flux and flow rate. Interestingly, the maximum heat transfer enhancement obtained with the wavy channel not only exceeds the straight one, but also occurs at a higher heat flux and faster flow rate. This finding demonstrates the advantage of wavy channels in management of intensive heat fluxes with NPC slurries. The study also investigates wavy channels with varying amplitude and wavelength. Increasing the wave aspect ratio from 0.2 to 0.588 strengthens Dean vortices and consequently increases the Nusselt number, optimal heat flux, and overall thermal performance factor.22 pagesen-USAttribution 4.0 International CC BY 4.0 Deedhttps://creativecommons.org/licenses/by/4.0/electronics coolingthermal managementcomputational fluid dynamicsencapsulated phase change slurriesUMBC Multi-Scale Thermal Transport Research Labwavy microchannel heat sinkText