Dispenser printed circular thermoelectric devices using Bi and Bi₀.₅Sb₁.₅Te₃
| dc.contributor.author | Madan, Deepa | |
| dc.contributor.author | Wang, Zuoqian | |
| dc.contributor.author | Chen, Alic | |
| dc.contributor.author | Winslow, Rich | |
| dc.contributor.author | Wright, Paul K. | |
| dc.contributor.author | Evans, James W. | |
| dc.date.accessioned | 2022-12-19T21:10:47Z | |
| dc.date.available | 2022-12-19T21:10:47Z | |
| dc.date.issued | 2014-01-08 | |
| dc.description.abstract | This work presents polymer based composite materials used in slurries form to print low cost and scalable micro-scale Thermoelectric Generator (TEG) devices. Bi-epoxy composite is chosen as n-type material and mechanical alloy p-type Bi0.5Sb1.5Te3 with 8 wt. % extra Te-epoxy composite is used as p-type material. Maximum power factor of 0.00008 W/m-K2 is achieved for Bi-epoxy and Bi0.5Sb1.5Te3 with 8 wt. % extra Te-epoxy composite dispenser printed thick films. A 10 couple dispenser printed circular TEG prototype produced 130 μW power at ΔT of 70 K resulting in a device areal power density of 1230 μW/cm2. | en_US |
| dc.description.sponsorship | The authors thank the California Energy Commission for supporting this research under Contract No. 500-01-43. We also thank Michael Nill, Jonathan Brown, Brian Mahlstedt, and Kevin Huang for their contributions. | en_US |
| dc.description.uri | https://aip.scitation.org/doi/full/10.1063/1.4861057 | en_US |
| dc.format.extent | 5 pages | en_US |
| dc.genre | journal articles | en_US |
| dc.identifier | doi:10.13016/m2z5uu-uq6z | |
| dc.identifier.citation | Deepa Madan, Zuoqian Wang, Alic Chen, Rich Winslow, Paul K. Wright, and James W. Evans , "Dispenser printed circular thermoelectric devices using Bi and Bi0.5Sb1.5Te3", Appl. Phys. Lett. 104, 013902 (2014) https://doi.org/10.1063/1.4861057 | en_US |
| dc.identifier.uri | https://doi.org/10.1063/1.4861057 | |
| dc.identifier.uri | http://hdl.handle.net/11603/26469 | |
| dc.language.iso | en_US | en_US |
| dc.publisher | AIP | en_US |
| dc.relation.isAvailableAt | The University of Maryland, Baltimore County (UMBC) | |
| dc.relation.ispartof | UMBC Mechanical Engineering Department Collection | |
| dc.rights | This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Deepa Madan, Zuoqian Wang, Alic Chen, Rich Winslow, Paul K. Wright, and James W. Evans , "Dispenser printed circular thermoelectric devices using Bi and Bi0.5Sb1.5Te3", Appl. Phys. Lett. 104, 013902 (2014) https://doi.org/10.1063/1.4861057 and may be found at https://aip.scitation.org/doi/full/10.1063/1.4861057. | en_US |
| dc.title | Dispenser printed circular thermoelectric devices using Bi and Bi₀.₅Sb₁.₅Te₃ | en_US |
| dc.type | Text | en_US |
| dcterms.creator | https://orcid.org/0000-0002-0061-2715 | en_US |