All-optical switching in a high-Q Fabry–Perot cavity filled with a quadratic material
dc.contributor.author | D’Aguanno, G. | |
dc.contributor.author | Angelillo, E. | |
dc.contributor.author | Sibilia, C. | |
dc.contributor.author | Scalora, M. | |
dc.contributor.author | Bertolotti, M. | |
dc.date.accessioned | 2020-05-21T15:12:44Z | |
dc.date.available | 2020-05-21T15:12:44Z | |
dc.date.issued | 2000 | |
dc.description.abstract | A theoretical analysis of the nonlinear quadratic interaction between two monochromatic plane waves at frequencies ω and 2ω in a Fabry–Perot cavity shows that all-optical control of reflectivity and transmissivity of the fundamental beam is possible under suitable conditions. We report all-optical switching of the fundamental beam for cavity lengths that vary from a few micrometers to a few millimeters. Specifically, we show that 100% all-optical switching can occur for a 6-µm cavity when the nonlinear coefficient is not greater than 20 pm/V and the input intensity does not exceed 10 GW/cm². Our analytical results are obtained without use of the slowly varying envelope approximation and without resort to the undepleted-pump approximation. | en_US |
dc.description.sponsorship | We thank Mark J. Bloemer for interesting discussions on the subject. This study has been partially funded by the Esprit-Open project of the European Community. G. D’Aguanno thanks the European Research Office for partial support of this effort. | en_US |
dc.description.uri | https://www.osapublishing.org/josab/abstract.cfm?uri=josab-17-7-1188 | en_US |
dc.format.extent | 9 pages | en_US |
dc.genre | journal articles | en_US |
dc.identifier | doi:10.13016/m2efcc-mkru | |
dc.identifier.citation | D’Aguanno, G.; et al.; All-optical switching in a high-Q Fabry–Perot cavity filled with a quadratic material; Journal of the Optical Society of America B Vol. 17, Issue 7, pp. 1188-1196 (2000); https://www.osapublishing.org/josab/abstract.cfm?uri=josab-17-7-1188 | en_US |
dc.identifier.uri | https://doi.org/10.1364/JOSAB.17.001188 | |
dc.identifier.uri | http://hdl.handle.net/11603/18693 | |
dc.language.iso | en_US | en_US |
dc.publisher | OSA Publishing | en_US |
dc.relation.isAvailableAt | The University of Maryland, Baltimore County (UMBC) | |
dc.relation.ispartof | UMBC Computer Science and Electrical Engineering Department Collection | |
dc.rights | This item is likely protected under Title 17 of the U.S. Copyright Law. Unless on a Creative Commons license, for uses protected by Copyright Law, contact the copyright holder or the author. | |
dc.rights | Public Domain Mark 1.0 | * |
dc.rights | This work was written as part of one of the author's official duties as an Employee of the United States Government and is therefore a work of the United States Government. In accordance with 17 U.S.C. 105, no copyright protection is available for such works under U.S. Law. | |
dc.rights.uri | http://creativecommons.org/publicdomain/mark/1.0/ | * |
dc.title | All-optical switching in a high-Q Fabry–Perot cavity filled with a quadratic material | en_US |
dc.type | Text | en_US |