High-Granularity Modulation for OFDM Backscatter

Author/Creator ORCID

Date

2023-07-20

Department

Program

Citation of Original Publication

X. Liu, Z. Chi, W. Wang, Y. Yao, P. Hao and T. Zhu, "High-Granularity Modulation for OFDM Backscatter," in IEEE/ACM Transactions on Networking, doi: 10.1109/TNET.2023.3286880.

Rights

© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

Subjects

Abstract

Orthogonal frequency-division multiplexing (OFDM) has been widely used in WiFi, LTE, and adopted in 5G. Recently, researchers have proposed multiple OFDM-based WiFi backscatter systems that use the same underlying design principle (i.e., codeword translation) at the OFDM symbol-level to transmit the tag data. However, since the phase error correction in WiFi receivers can eliminate the phase offset created by a tag, the codeword translation requires specific WiFi receivers that can disable the phase error correction. As a result, phase error is introduced into the decoding procedure of the codeword translation, which significantly increases the tag data decoding error. To address this issue, we designed a novel OFDM backscatter called TScatter, which uses high-granularity sample-level modulation to avoid the phase offset created by a tag being eliminated by phase error correction. Moreover, by taking advantage of the phase error correction, our system is able to work in more dynamic environments. Our design also has two advantages: much lower bit error rate (BER) and higher throughput. We conducted extensive evaluations under different scenarios. The experimental results show that TScatter has i) three to four orders of magnitude lower BER when its throughput is similar to the latest OFDM backscatter system MOXcatter; or ii) more than 212 times higher throughput when its BER is similar to MOXcatter. Our design is generic and has the potential to be applied to backscatter other OFDM signals (e.g., LTE and 5G).